Avaya S8400, Установка и настройка, Страница: 43 / 80

SIPI address configuration
Installing and Configuring the Avaya S8400 Media Server February 2007
43
3. Clear the Address Resolution Protocol (ARP) cache in the laptop.
4. To log into the SIPI, use SSH and the IP address
192.11.13.6
.
For information on how to use SSH, see Accessing the command line interface of the
server with SSH on page 63.
Note:
Note:
While connected to the SIPI, type
help
or
?
to obtain online help. Most
commands have two or three letter abbreviations.
5. Type
ipsilogin
and press Enter .
Note:
Note:
The craft login used on the SIPI has a different password from the craft login used
on the media servers.
6. Log in as
craft
.
Prompt = [IPADMIN]:
7. Type
show control interface
and press Enter and then type
show port 1
and
press Enter to see the current control interface settings.
8. To set the control interface, type
set control interface ipaddr netmask
and
press Enter , where
ipaddr
is the customer-provided IP address and
netmask
is the
customer provided subnet mask.
9. Type
quit
and press Enter to save the changes and exit the SIPI session.
10. Log back in to the SIPI using SSH.