Avaya P330, Справочное руководство

Страница: 92 / 360

Chapter 2 Avaya P330 Layer 2 CLI Commands
74 Avaya P330 Reference Guide
Example:
set port security
User level: supervisor
Use the
set port security
command to enable MAC security on a port or a
range of ports at the module level. The port security is activated only after you
enable the secutity mode at the stack level using the
set security mode
command.
L
This command is not applicable to ports on P330-ML switches.
This command is used to set port security for ports in other P330 switches in the
stack.
The syntax for this command is:
set port security { enable | disable } [<module>[/<port>]]
Example:
set port self-loop-discovery Admin_Status
User level: privileged, supervisor.
L
This command is not available on the P330-ML switches, hence a session should
be opened to the relevant P330 switch in order to execute this command.
Use the
set port self-loop-discovery Admin_Status
command to
enable or disable a port’s IBM token ring discovery mode. The port’s self-loop-
discovery feature is activated only after you enable the self-loop-discovery mode at
the module level using the
set self-loop-discovery Admin_status
command.
L
If Spanning Tree is enabled and is set to rapid-spanning-tree version, there is no
need to use the Self-loop-discovery feature ; the rapid spanning tree algorithm
avoids loops generated by the IBM token ring cabling.
The syntax for this command is:
set port self-loop-discovery Admin_Status <enable|disable>
P330-N# set port redundancy-intervals 100 20
enable | disable Set the port security enable or disable
module/port The switch number/the port number
P330-1(super)#
set port security enable 1/2
Port 1/2 secured.