Avaya P330, Справочное руководство

Страница: 165 / 360

Chapter 2 Avaya P330 Layer 2 CLI Commands
Avaya P330 Reference Guide 147
Use the
show secure mac port
command to display the secure MAC address
defined for a secured port.
The syntax for this command is:
show secure mac port [<mod-num>/<port-num>
]
Example:
show security mode
User level: user, privileged, supervisor
Use the
show security mode
command to display the status of the MAC
security feature.
L
Layer 2 commands are only available if you open a
switch
session with the
Master switch.
The syntax for this command is:
show security mode
Example:
show self-loop-discovery
User level: user, privileged, supervisor
L
This command is not available on P330-ML switches, hence a session should be
opened to the relevant P330 switch to execute this command.
Use the show
self-loop-discovery
command to display a switch’s IBM token
ring cable discovery status.
mod-num Module where the secured port is located
port-num Secured port number
P330-N# show secure mac port 1/7
Port Secure-Src-Addrs
------ -----------------
1/7 00-40-0d-9b-9d-00
00-40-0d-98-61-2e
00-40-0d-8a-a3-23
P330-N# show security mode
Security mode enabled