Avaya P330, Справочное руководство

Страница: 48 / 360

Chapter 2 Avaya P330 Layer 2 CLI Commands
30 Avaya P330 Reference Guide
Example:
ip access-list-name
User level: privileged, supervisor.
L
This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the i
p access-list-name
command to assign a name to a policy list.
The syntax for this command is:
ip access-list-name <policy-list-number> <name>
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
ip access-list-owner
User level: privileged, supervisor.
L
This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the
ip access-list-owner
command to set the owner for a specific policy
list.
untrusted Forward the packet with priority 0
trust-cos Forward the packet with its original 802.1p priority (default)
trust-dscp Forward the packet with the maximum priority between 802.1p and
the priority obtained from the DSCP-CoS mapping table
Router-N# ip access-list-dscp trust 100 trust-dscp
Done!
<policy-list-number> integer (100...149)
<name> list name
Router-N# ip access-list-name 101 morning