Avaya Network Management Console User Guide
26
Avaya Network Management Console Introduction
To remove a device from the Specific IP’s table:
1.
Select a device.
2.
Click
Delete
.
3.
Click
Apply
. The device is deleted from the Specific IP’s table.
Setting Connectivity Polling Parameters
Connectivity polling parameters determine whether Avaya Network
Management Server will use PING to determine the status of devices
that do not support SNMP, the interval between PINGs, and the number
of times that Avaya Network Management Server will unsuccessfully
PING a node before declaring it to be unreachable. To set default
connectivity polling parameters:
1.
Click the
Connectivity Polling
tab at the top of the Avaya Network
Management Console Options dialog box. The Connectivity
Polling page appears.
Figure 3-6. Avaya Network Management Console Options Dialog
Box - Connectivity Polling Page
2.
Select a Connectivity Status.
On
means that devices will be
PINGed.
Off
means that devices will not be PINGed.
3.
Enter a number in the
Retries
field. This is the number of times
Avaya Network Management Server will unsuccessfully PING a
node before declaring it to be unreachable.
