Avaya Network Management Console User Guide
22
Avaya Network Management Console Introduction
Figure 3-3. Avaya Network Management Console Options Dialog
Box - Default Page
To add a new set of SNMP default parameters to the list:
1.
Click
Add
. A new row opens in the Default table.
2.
Select V1 or V3 (login mode only) from the
Type
pull-down
listbox.
3.
If you selected V1 in the
Type
field, enter read and write
community values in their respective fields.
4.
If you selected V3 in the
Type
field, select a user name from the
User
pull-down listbox. The user name must have been defined in
the User Administration Window. For more information, refer to
the Network Management User Administration User’s Guide.
5.
Enter a number in the
Timeout [ms]
field for the number of
milliseconds Avaya Network Management Server will wait for a
response when polling a device.
6.
Enter a number in the
Retries
field for the number of times
Avaya Network Management Server will try to poll a device.
7.
Click
Apply
. The new default SNMP parameters definition is added
to the Default table.
To change the position of a row in the Default table:
1.
Select a row.
2.
Click the arrows to move the row up or down in the table.
3.
Click
Apply
. The new row position is saved.
