Chapter 11
113
Avaya Network Management Console User Guide
Figure 11-11. Action Definition Dialog Box
4.
Click
Select Action
. To unassign an action, click
None
, and
continue with step
7
.
5.
Select a defined action from the pull-down listbox. For more
information on defining actions, refer to
“Defining Actions” on
page 105
.
6.
Select source devices for the action. The Event Action is defined
for only the devices in the
Members
listbox or for all devices.
To define the action for all network devices, check the
Add All
Sources
checkbox.
To add individual devices to the
Members
list:
a.
Select a device in the
Unassigned
list.
To select a contiguous group of devices, press the
SHIFT
key
and select the last device in the group.
To select a non-contiguous group of devices, press the
CTRL
key while selecting additional devices.
b.
Click
. The selected devices are moved to the
Members
list.
To remove individual devices from the
Members
list:
a.
Select a device in the
Members
list.
To select a contiguous group of devices, press the
SHIFT
key
and select the last device in the group.
To select a non-contiguous group of devices, press the
CTRL
key while selecting additional devices.
b.
Click
. The selected devices are moved to the
Unassigned
list.
7.
Select a category from the
Category
pull-down listbox.
