Page 26 - Wall Mounting 2000 Series Telephones Telephone Installation
Wall Mounting 2000 Series Telephones
Mounting brackets exist which clip onto the base on Avaya IP Office - Small Office Edition
telephones. These brackets (two required per telephone) can be used to either raise the
desk position of the telephone or for wall mounting. Before wall mounting a telephone,
check that the surface is flat, vertical and not subject to movement or vibration.
To wall mount an Avaya IP Office - Small Office Edition telephone :
1. Using the dimensions given below, mark the position for the screw holes. Ensure that
adequate clearance above and below the telephone is allowed.
2. Drill the necessary holes and insert the wall plugs.
3. Insert the screws, leaving the heads approximately 3mm (
1
/
8
") proud of the surface
(check by clipping a bracket over the screw head).
4. Attach the brackets to the telephone. Then slide the bracket key-slots over the screw-
heads.
5. Reverse the position of the handset retainer tab (located below the hook switch on the
telephone). This keeps the handset in place whilst the telephone is mounted on the
wall.
Additional Items
:
– Two No. 8 Pan head o
Round head screws.
– Two wall plugs.
– Drill and drill bit.
– Screwdriver.
Avaya IP Office - Small
Office Edition 2030/50
Telephones
(Not to scale)
Avaya IP Office - Small
Office Edition 2010 , Avaya
IP Office - Small Office
Edition 20AT Telephones
(Not to scale)
Page 26 - Telephone Installation
IP Office - Small Office Edition Installation Manual
Wall Mounting 2000 Series Telephones
40DHB0002UKED – Issue 2 (29th July 2004