Page 46 - Configuration Examples
Part 1 - VPN Client Configuration
Install the NetScreen-Remote VPN Client application and create a new connection
using the details shown in the table below. The information shown here is specific to
NetScreen-Remote 10.0.0 (build 10).
NetScreen-Remote VPN Client
1-
My Connection
New Connection
Connection
Security:
Secure
Remote Party Identity & Addressing
ID Type: IP subnet
Subnet:192.168.43.0
Mask:255.255.255.0
Port:
All
Protocol:
All
Connect using: Secure Gateway Tunnel
ID Type: IP address
217.37.69.116
My Identity
Pre-shared
Key:
password
Select
Certificate:
None
ID
Type:
IP
Address
Port:
All
Virtual
Adapter:
Disable
Internet Interface: <Local _NIC_Card_Name>
IP
Address:
217.37.65.124
Security Policy
Select Phase 1 Negotiation Mode: Main
Authentication (Phase1)
Proposal
1
Authentication method: pre-shared key
Encryp
Alg:
DES
Hash Alg: MD5
SA
life:
Seconds
Seconds:
86400
Key Group: Diffie-Hellman Group 1
Authentication
(Phase2)
Proposal
2
SA life: Seconds
Seconds:
86400
Compression:
None
Encapsulation
ESP:
<selected>
Encrypt Alg: DES
Hash Alg: MD5
Encapsulation: Tunnel
Page 46 - Configuration Examples
IP Office (R3.0)
Part 2: VPN configuration
40DHB0002UKER Issue 3 (4th February 2005)