Conferencing Center 3.0 Installation Manual
Conference Finished
This sample failure route will define the action taken by the system when a participant dials into a
conference that has already ended. Again, this is only a sample route in which the conference participant
is played a message stating that the conference already finished.
To set up this failure route:
1. Create a recording similar to the following:
•
“Sorry, the conference you are trying to join has already finished.”
2. Click
Basic Actions
on the tool bar and select
Generic
.
3. Click in the right-hand pane to place the action.
4. Open the
Properties
for
Generic
.
•
Change the
Token Name
to
Play Finished.wav
.
•
In the Entry Prompts tab, click the (green cross), click
and select the name of the
wav file you created in step 1.
•
Click
Close
and
OK
.
5. Connect
Conference Finished
to
Play Finished.wav
.
6. Click
Telephony Actions
on the tool bar and select
Disconnect
.
7. Click in the right-hand pane to place the action.
8. Connect
Play Finished.wav
to
Disconnect
.
9. Click
Save & Make Live
on the toolbar.
24
