Avaya IP Office 4601, Руководство пользователя

Страница: 23 / 30

Telephone Management and Troubleshooting
Interpreting LED Prompts
Issue 1.8 March 2004 23
Interpreting LED Prompts
3
Since there is no display, the 4601 uses its LEDs to indicate error, wait, data entry,
and other conditions. Use the following table to interpret and understand the
phone’s LED signals.
Intercept/Time-out -_-_-_- Alternating high and low tone indicating
either a dialing error, denial of a requested
service or failure to dial within a preset
interval (usually 10 seconds) after lifting
the handset or dialing the previous digit.
Recall Dial - - - ----------- Three shorts tone bursts followed by a
steady dial tone to indicate a feature
request has been accepted and dialing
can start.
Reorder -- -- -- -- -- -- Fast busy tone repeated every
half-second to indicate all phone trunk
lines are busy.
Ringback ---- ---- ---- ---- Low-pitched tone repeated 15 times a
minute to indicate the number dialed is
ringing.
If This LED
Is Doing
This For This
Amount of Time
Then
Message Waiting
indicator at the top
of the phone and the
Message button
LED on the left
middle of the
faceplate Flashing on
and off 500 milliseconds
on, 500
milliseconds off,
continuously The phone is waiting
for you to enter data.
Message Waiting
indicator at the top
of the phone and the
Message button
LED on the left
middle of the
faceplate Illuminated,
but not
flashing,
winking, or
fluttering Steadily User input is not
allowed (i.e.,
processing is
occurring) or a voice
message is waiting.
Feedback (Handset) Tones Meaning