Nortel Norstar
Confidential
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
6
Select “Assign/Change” option
Administer parameters as follows:
Called Numbers : any
Calling
Numbers:
any
service Name: AUDIX
•
Assignment of Channel to Groups
Select “Voice System Administration” menu
Select “Voice Equipment” menu
Select “ACTIONS” button, this will bring up the Actions menu.
Select “Assign/Change” option
From the Assign/Change screen, select “Channels to Groups”
option.
By default all channels are assigned to group 2. The dedicated
MWI channel
must
be assigned to a
different group
to ensure
that the same channel that turns on MWI lamp turns off the lamp.
Do this by assigning the MWI to device 3.
This is a switch limitation. Dedicated MWI channels that are
assigned to a different group must also be “unassigned” from
group 2. If more than one dedicated MWI channel, each channel
should be in a different group. By convention the highest
channels are used as dedicated MWI channels.
NOTE: It is important that you restart the voice system after
assigning the MWI to device 3.
Inband PBX Configuration is only used when the PBX is defined as
a “Other or Generic” The Norstar DMI does not require these fields
to be defined.
Message Waiting MWI Assignment
Select “Switch Interface Administration” menu
Select “Call Data Interface Administration” menu
Select “MWI Administration” menu
Select “MWI Parameters” Verify the MWI codes are as
followed:
NOTE: The MWI ON/OFF codes do need to be defined.
Program the code to turn ON message waiting as *1, and the
message cancel code as *#1 to turn it OFF.
•
Transfer
Security
Assignment
Select “Voice System Administration” menu
Select “Transfer Security” menu
Assign restrictions if any used.
•
Message Waiting MWI Device Assignment
Select “Switch Interface Administration” menu