Avaya INTUITY AUDIX, Конфигурационные заметки, Страница: 5 / 12

Nortel Norstar Confidential
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
5
Norstar integrations because the DMI4 build a name table for
extension and keys on the first port and MWI port being in
service. Information on setting this option can be found in the
DMI4 manual.
- DMI4 ports are in service if the digital LED (green) is on
solid. This can be verified by checking the analog side of the
DMI4 for dial tone on the port in question.
13B
6.0 CONFIGURING THE INTUITY
†
The following define the steps required on the INTUITY
TM
•
HINT: When changes to the Switch Interface Administration are
completed, a message appears on the screen indicating to restart the
INTUITY
TM
voice system. However, this task is not required after
each step. Once ALL changes are completed the system must then
be restarted.
ƒ
Note: With Release 5.0 the switch selection can only be viewed from the
Switch Interface Administration. Changes to the Switch Selection must be
made when calling your local TSO.
•
Switch Selection
Select “Switch Interface Administration” menu
Select “Switch Selection” menu
Administer parameters as follows:
Country: <Press F2 {CHOICES}>.
Switch: Nortel Norstar-DMI
•
Assign PBX Extensions to Channels
Select “Voice System Administration” menu
Select “Voice Equipment” menu
Select “Actions “ button
From the “Assign. Change” screen,
Select “PBX Extension to Channel” option
Assign the extension numbers computed in the above step to all
used voice channels.
•
Assign Service to Channels
Select “Voice System Administration” menu
Select “Voice Equipment” menu
Select “Actions “ button. This will bring up the “Actions Menu”
From the “Assign. Change” screen,
Select “Services to Channels” option
Assign DNIS as service to all channels.
•
Assign Number Services to Channels
Select “Voice System Administration” menu
Select “Number Services” menu