Disclaimer: Configuration Notes are designed to be a general guide reflecting AVAYA Inc.’s experience configuring its systems.
These notes cannot anticipate every configuration possibility given the inherent variations in all hardware and software products.
Please understand that you may experience a problem not detailed in a Configuration Note. If so, please notify the the
TAC/TSO at (408) 922-1822 and if appropriate we will include it in our next revision. AVAYA Inc. accepts no responsibility for
errors or omissions contained herein.
0B
Configuration Note 9125
– RIP 03/10
Nortel Norstar (Inband-Mode Code)
using PBXLink DMI-4
Norstar
Voice Path
Minimum Software
DR5 or higher
Call ID
MWI
Multiple Return-to-Operator
CO
Line
DMI
DMI
INTUITY
Tip
Ring
Minimum Software
Release 5.1
Voice Path
1B
1.0 METHOD OF INTEGRATION
With analog inband integration, one pathway between the PBX and the
INTUITY
TM
system transmits both call information and voice
communications. The pathway is provided by 2-wire analog single-line
circuits that connect to IVC6 Tip/Ring cards in the system. The IVC6
simulates 2-wire analog lines. Calls to an INTUITY
TM
port are preceded
by the called party information from the PBX in DTMF format. The
INTUITY
TM
system answers and plays the appropriate greeting. Message-
waiting indication is set and canceled using DTMF commands over the
same pathway.
2B
2.0 AVAYA INTUITY
TM
ORDERING INFORMATION
•
Tip/Ring Voice Port Cards (IVC6), six analog connections per card
•
Serial and Inband Integration Software (FID 11 or higher)
•
INTUITY
TM
Software Release 5.1
I N T U I T Y
T M
A U D I X M e s s a g e
S e r v e r
With Inband integration,
one pathway between the
PBX and the INTUITY
TM
system transmits both call
information and voice
communications
Avaya INTUITY
TM
Requirements
U
IMPORTANT
U
:
This CN is for Support ONLY of Existing Integrations as originally installed.
No NEW Sales or Conversions to different Integrations are supported.