Contents - Page 23
Installation of Voice Compression Modules (VCM)
Optional Voice Compression Modules (only one for IP 403/IP406 module and a
max. of two for IP412, see pages 32 and 35 respectively) are fitted to an IP Office
base unit as follows:
Procedure
1. Remove the three fixing screws on the rear of cover.
2. Turn the unit over and remove the four fixing screws from the base.
3. Slide the cover from the unit.
4. Mount the VCM in position as shown below and secure with the two snap-in
spacers.
Only an IP412 Office can accommodate a second VCM (of any type); the first
module can be mounted in either position.
5. Replace the cover and secure with the seven fixing screws.
CAUTION:
While installing, ensure that you wear a ground wrist strap that is
connected to a suitable grounding point.
Installation Manual INDeX Media Gateway
Contents - Page 23
38DHB0002UKGA Issue 1 (12/05/2004)