Ringer Controls - Page 9
INDeX DECT 20DT Handset User's Guide
Ringer Tone - Page 9
38DHB0002UKCW – Issue 7 (10/03)
Ringer Controls
Ringer Controls
Ringer Tone
You can select between 9 ringer tones (not available when twinned with a desk top phone).
1. Press
MENU*
and .
SET PROFILE/PROFILE
1
appears.
2. Press
>
until required profile appears and then press .
3. Press
>
until
RINGER TONE
appears, then press . Use
<
and
>
to select the tone
required. To help the tones are played during selection.
4. When the required tone is found, press to save it and
MENU
to finish.
* Note:
On older menu structures (see pages 4 and 5), after pressing
MENU
, press
>
to
display
PROFILE SET UP.
Press and
>
until required profile appears.
Press and continue from step 3.
Ringer Volume, On/Off
You can adjust the volume of your ringer (five levels) or you can switch the ringer off (not
available when twinned with a desk top phone). This is useful when going into meetings.
With the ringer off, incoming calls make the handset vibrate. The ringer volume must be
reset manually.
To switch the handset ringer on/off:
1. Press
MENU*
and .
SET PROFILE/PROFILE 1
appears.
2. Press
>
until required profile appears and then press .
3. Press
>
until
RINGER VOL
appears, then press . Use < and
>
to select the volume
required or select
OFF
. To help the volume is played during selection.
4. When the required volume has been selected, press to save it and
MENU
to finish.
* Note:
On older menu structures (see pages 4 and 5), after pressing
MENU
, press
>
to
display
PROFILE SET UP.
Press and
>
until required profile appears.
Press and continue from step 3.
B-Answer On/Off (Auto-Answer)
You can set the handset to automatically connect to calls after a single ring (not available
when twinned with a desk top phone). This is useful for headset operation. When selected,
B-ANSWER
appears on the display.
1. Press
MENU*
and .
SET PROFILE/PROFILE 1
appears.
2. Press
>
until required profile appears and then press .
3. Press
>
until
B-ANSWER
appears and then press .
4. Use
<
and
>
to switch
O
N or
OFF
.
5. When set as required press and
MENU
to finish.
* Note:
On older menu structures (see pages 4 and 5), after pressing
MENU
, press
>
to
display
PROFILE SET UP.
Press and
>
until required profile appears.
Press and continue from step 3.
