Key Clicks, Out of Range & Vibrator - Page 11
INDeX DECT 20DT Handset User's Guide
Key Click Sounds - Page 11
38DHB0002UKCW – Issue 7 (10/03)
Key Clicks, Out of Range & Vibrator
Key Clicks, Out of Range & Vibrator
Key Click Sounds
You can set if the handset keys should give a click when pressed.
1. Press
MENU*
and .
SET PROFILE/PROFILE 1
appears.
2. Press
>
until required profile appears and then press .
3. Press
>
until
KEY CLICK
appears, then press .
4. Use
<
and
>
to either switch
OFF
or to increase the volume.
5. Press to save the setting and
MENU
to finish.
* Note:
On older menu structures (see pages 4 and 5), after pressing
MENU
, press
>
to
display
PROFILE SET UP.
Press and
>
until required profile appears.
Press and continue from step 3.
Out of Range Tone
An out-of-range warning tone occurs when you are about to go out-of-range of the current
base station and either there is no base station to handover the call to or the next base
station already has its maximum number of calls.
1. Press
MENU*
and .
SET PROFILE/PROFILE 1
appears.
2. Press
>
until required profile appears and then press .
3. Press
>
until
OUT of RANGE
appears, then press .
4. Use
<
and
>
to either switch
ON
or
OFF
.
5. Press to save the setting and
MENU
to finish.
* Note:
On older menu structures (see pages 4 and 5), after pressing
MENU
, press
>
to
display
PROFILE SET UP.
Press and
>
until required profile appears.
Press and continue from step 3.
It is strongly recommended that the
OUT of RANGE
option is always
ON
.
Vibrator
You can set the handset to vibrate and ring or just vibrate or just ring (see page 9) when an
incoming call arrives (not available when twinned with a desk top phone).
1. Press
MENU*
and .
SET PROFILE/PROFILE 1
appears.
2. Press
>
until required profile appears and then press .
3. Press
>
until
VIBRATOR
appears, then press .
4. Use
<
and
>
to either switch
ON
or
OFF
.
5. Press to save the setting and
MENU
to finish.
* Note:
On older menu structures (see pages 4 and 5), after pressing
MENU
, press
>
to
display
PROFILE SET UP.
Press and
>
until required profile appears.
Press and continue from step 3.
