Option
Description
Option
Description
Enable BLF List
Use this check box to
enable BLF lists.
BLF List Number
Use this option to set the
BLF list number. It allows
one BLF key to monitor
the status of a group.
Multiple BLF lists are
supported.
SIP Encryption
Use this check box to
enable SIP encryption.
The SIP transmission
will be encrypted.
RTP Encryption
Use this check box to
enable RTP encryption.
The RTP transmission
will be encrypted.
SIP Encryption Key
Use this option to set the
pass phrase for SIP
encryption.
RTP Encryption Key
Use this option to set the
pass phrase for RTP
encryption.
TLS Version
Use this option to select the appropriate TLS
version. Supported versions are TLS 1.0, 1.1, and
1.2.
Dial peer page
To access this page, click the
Line
tab and then click
Dial Plan
.
From this page, you can create rules to make dialing easier. The following table describes the
fields you can configure to create dialing rules. All of these fields, except
Phone Number
and
Call
Mode
, are optional.
Field
Description
Phone Number
There are two types of matching: Full matching and prefix
matching. With full matching, the entire phone number is
entered and then mapped according to the dial peer rules.
With prefix matching, only part of the number is entered
followed by
T
. The mapping will then take place whenever
these digits are dialed. The prefix mode supports a maximum
of 30 digits.
Note:
Two different special characters are used:
• x -- Matches any single digit that is dialed.
• [ ] -- Specifies a range of numbers to be matched. It
may be a range, a list of ranges separated by commas
or a list of digits.
Destination
Destination IP address.
Port
Signal port. The default is 5060 for SIP.
Table continues…
Line tab
October 2019
Installing and Administering the Avaya H229 Phone
29
