Advanced page
To access this page, click the
Network
tab and then click
Advanced
.
From this page, you can configure the following advanced settings:
• Link Layer Discovery Protocol (LLDP) settings.
• WAN VLAN settings.
• LAN port VLAN settings.
• Quality of Service (QoS) settings.
• 802.1X settings.
Using DHCP when VLAN is enabled
About this task
To get DHCP, after enabling VLAN, the switch port that uses VLAN must be in trunk mode.
Procedure
1. Use the switch port IP address to access the VLAN interface.
2. From the VLAN tab, set
Tagging
to
tagAll(trunk)
.
VPN page
To access this page, click the
Network
tab and then click
VPN
. From this page, you can configure
a Virtual Private Network (VPN) connection and view information about the VPN status.
VPN connections
With VPN, the device can create a tunneling connection to a server and become part of the
server’s network. The network transmission of the device can be routed through the VPN server.
Web portal navigation
October 2019
Installing and Administering the Avaya H229 Phone
22
