Managing phone reboots
About this task
By default, the phone reboots every time the upgrade file is updated. Use this procedure if you do
not want the phone to reboot after every update. When you perform this procedure, the phone
only reboots after a major configuration change. If you update the configuration file during a call,
the change takes effect after the call ends.
Procedure
1. Open the configuration file template that you downloaded from the
website.
2. In the AUTOUPDATE CONFIG MODULE section, add the following line:
CFG Update Realtime:1
3. Save your changes and upload the file to the file server.
Avaya Aura
®
configuration for failover
About this task
Failover occurs when the primary server goes down and the phone registers to the secondary
Session Manager. If you end an active call after failover occurs, the line on Communication
Manager might remain busy. If this occurs, you will not be able to receive incoming calls. Use this
procedure to modify the configuration on Avaya Aura
®
to prevent this issue from happening.
Procedure
Do one of the following:
• Increase the number of lines in the profile configuration on System Manager.
By default, the profile has three lines configured for the extension. Increase it to five lines or
more.
Tip:
Increase the number by two lines at a time. For example, if you have three lines, you can
increase to five, and if you have five lines, you can increase to seven.
For more information about endpoint configuration on System Manager, see
Administering
Avaya Aura
®
System Manager
.
• Modify the Communication Manager configuration to allow the phone to receive a call on the
last available line if the first two are busy.
For more information, see
Administering Avaya Aura
®
Communication Manager
.
Managing phone reboots
October 2019
Installing and Administering the Avaya H229 Phone
17
