Avaya G150, Руководство по установке и настройке

Страница: 68 / 254

Communication Manager Administration for the Avaya G150 Media Gateway
68 Installation and Configuration of the G150 Media Gateway
Figure 26: Locations screen (page 1)
2. On the Locations screen, complete the following fields:
●
Name: Assign a name for this location, for example, Denver-01.
●
Timezone Offset: Enter the time difference in hours and minutes from the media server.
●
Rule: Assign the daylight-savings rule that applies to this location.
Tip:
Tip:
Use display daylight-savings rules to see what rules are established for this
system.
●
NPA: Type the appropriate area code for the location.
●
ARS FAC: Type an ARS FAC for outside dialing access if the number should be different
than the system-wide ARS FAC.
●
Attd FAC: Type an Attendant FAC for attendant access if the number should be different
than the system-wide attendant FAC.
●
Loc. Parms: Type the number of a set of location parameters if the G150 requires unique
parameters such as loss parameters.
●
Prefix: If necessary for the G150 location, type the prefix that Communication Manager
should insert to the calling number ID for calls made from the location.
●
Proxy select route pattern: Not applicable.
3. Press ENTER to effect the changes.
change locations Page 1 of 1
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Loc. Name Timezone Rule NPA ARS Attd Loc. Pre- Proxy Sel.
No Offset FAC FAC Parms. fix Rte. Pat.
1. MainS8500HQ + 00:00 1 312
2. remoG150denver- 01:00 1 303 ____ ____ __ ____ _______
3. Lincroft- 01:00 1 953 ____ ____ __ ____ _______
xxx _______________ _ __:__ __ ___ ____ ____ __ ____ _______
xxx _______________ _ __:__ __ ___ ____ ____ __ ____ _______