Avaya Ethernet Routing Switch 8300 Series, Руководство по установке

Страница: 33 / 50

18. Turn the DC input power source on or reset the power source circuit breaker to
provide power to the power supply.
19. Turn the power supply switch to the on position.
Important:
Due to the N+1 power sharing architecture, if your chassis contains two or three
nonredundant power supplies, Avaya recommends that you turn on the power
supplies simultaneously. If you wait longer to turn on the supplies, the power
supplies shut off within 7 seconds. To correct this condition, turn off the power
supplies for 2 minutes, and then simultaneously turn on the power supplies
again.
20. If the LED on the power supply does not turn on, contact the Avaya Technical
Support.
Job aid: Inserting the DC power supply
Figure 1: Inserting the DC power supply: 8306 and 8310 chassis
Installing the DC power supply
Installation — DC Power Supply May 2011 33