Site Surveys - Page 9
Compact DECT - Installation Manual
Page 9
38DHB0002UKFH – Issue 5 (27th October 2003)
Using the Site Survey Kit
Subscribing to the Survey Base Station
Up to eight handsets can be subscribed to the Survey Base Station. All these
handsets can display the RSSI signal quality simultaneously but only one can
receive the audio input at any time. Normally only one handset is subscribed
to the Survey Base Station.
1. Connect the Survey Base Station to it's power supply and switch on.
2. Turn the handset on. Assign it a number between 1 and 8 by dialling
*99972*
x
where
x
is the number between 1 and 8 (each handset must
have a discrete number). Then press
9
.
3. Press
MENU
and the
>
key until
LOGIN
appears and then press
9
.
SELECT
LOGIN
appears. Before subscribing to system, you are
recommended to remove all other subscriptions (steps 4-6).
4. Press
>
until
SUBSCRIPTION REMOVE
appears and then press
9
.
5. Enter the password (default 0000) and press
9
to display
SUBSCRIPTION REMOVE?
Press
9
to display any previously entered
System ID (appears below
SYSTEM X,
where X = 1 to 4). Press
9
to
remove.
6. You are returned to
SUBSCRIPTION CREATE.
Press
>
until
SUBSCRIPTION REMOVE
appears. Repeat from step 4 for all
previously entered System IDs.
7. When completed, press
MENU
twice and then press
>
until
LOGIN
appears. Press
9
to display
SELECT LOGIN
and press
9
again to
display
SYSTEM X,
where X = 1 to 4). Use
>
to select required system
number and press
9
.
8. Press
>
to display
SUBSCRIPTION CREATE
and the press
9
to begin
subscription.
The handset is searches for a system to which it can
subscribe. Press and hold the subscribe button on the Survey Base
Station for 3 seconds. The Survey Base Station will then stay in
subscribe mode for one minute.
9. Use
the
<
and
>
buttons to display the ID numbers of available DECT
systems found by the handset. Look for the ID number of the Survey
Base Station (printed on the back of the Survey Base Station) and then
press
9
.
10. Use the
<
and
>
to select which system number you want the Survey
Base Station assigned to and then, at the
AC:
prompt, enter
1234
(or on
older systems 12345678) and press
9
.
11.
SUBSCRIPTION WAIT
appears. When successfully subscribed, the
handset bleeps. Should
SUBSCRIPTION FAILED
appear, repeat from
step 8.