Avaya 3920, Руководство по установке

Страница: 52 / 60

4 Installing a Repeater
52 Registering a Repeater to a Different Base
Planning and Installation Guide
Registering a Repeater to a Different Base
Perform this procedure if you want to register a repeater with a different base.
Once the repeater is registered, you must reset it before you can change the
registration to a different base. If you want to reset the repeater and clear its
registration, perform the following steps:
1
Unplug the AC adapter from the wall outlet.
2
Plug the AC adapter into the wall outlet for 1 to 5 seconds, and unplug it
again.
3
Plug the AC adapter into the wall outlet for 25 to 35 seconds, and unplug it
again.
4
Set the base of the Avaya 3920 Wireless Telephone into registration mode
by pressing and holding the registration button on the base for 3 seconds.
The indicator on the base flashes.
5
Plug the AC adapter of the repeater into a wall outlet.The LED on the
repeater flashes briefly and then remains on. The repeater is now
registered to this base and is ready to use.
If the LED continues to flash, try registering the repeater again.
6
Unplug the AC adapter from the outlet and move the repeater to the
selected location. The repeater will stay registered to the base.