background image

 Overview 11

Installation Guidelines

Overview

This chapter provides general guidelines for installing the Avaya 3920 Wireless 
Telephones. Following these guidelines will help ensure satisfactory 
performance of the Avaya 3920 Wireless Telephones. 

The following limitations apply for the Avaya 3920 Wireless Telephone:

• A maximum of six base units can be installed at one site.

• A maximum of 20 radio transmitting devices (base units and repeaters) can 

be installed at one site. 

Up to six of those devices can be base units

. This 

number may be reduced if other wireless telephones using Dect 6.0 
technology are used at the same site. Repeaters enable you to extend the 
coverage area of your telephone in all directions. For more information 
about repeaters, see 

“Installing a Repeater” on page 23

.

• The base units must be located at least 17 feet apart from one another.

• The repeaters must be located at least 35 feet apart from base units and 

other repeaters.

• The coverage area depends on the environment. The range of radio 

coverage depends on the material of which the building is composed. For 
example, concrete/metal walls decrease the range of coverage of a 
wireless telephone much more than wood/plasterboard walls. Also, large, 
metal objects like storage racks in a warehouse can decrease the range of 

Содержание 3920





























































Отзывы: