Avaya 3810, Инструкция по установке и эксплуатации

Страница: 12 / 58

2 Installing the Telephone
12 Install the Base Unit on a Desktop
Installation and Use
Install the Base Unit on a Desktop
This section provides procedures to install the base unit on a desktop or table.
If you want to mount the base unit on a wall, go to “Install the Base Unit on a
Standard Wall Plate” on page 14 or “Install the Base Unit Directly on a Wall” on
page 17 .
1
Plug one end of the 14-foot telephone cord into the “Line In” jack on the
base unit.
2
Plug the other end of the telephone cord into the telephone jack that is
connected to your communications system.
Figure 2: Connect Telephone Cord
Line In
jack
Telephone jack connected
to communications
system