VER 1.0
6
CONNECTING TO A COMPUTER
CONNECTING THE XD5
1.
Check the Voltage Selector Switch for proper setting. Connect the AC Power
Cord to the XD5.
2.
Insert the USB 3.0, eSATA, FireWire 800 or 400 cable into the corresponding
port of the XD5 and the host computer.
NOTE:
The XD5 should only be connected to a host computer via one type of
data cable. Connecting the XD5 to a computer simultaneously via two or
more data cables is not recommended and can cause data loss.
3.
Press the Power Switch to turn on the XD5.
4.
When powered on, the disk LED lights (blue) will illuminate when the drives
are detected and powered on.
5.
You are now ready to begin using your XD5.
Содержание XD5
Страница 1: ...VER 1 0 1 ...
Страница 5: ...VER 1 0 5 SYSTEM UNIT VIEWS PACKAGE CONTENTS HARDWARE GUIDE ...