Avastor XD5, Руководство пользователя

Страница: 3 / 19

VER 1.0 3
GENERAL INFORMATION
COPYRIGHT
This document is the copyright of Avastor Corporation 2012. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying,
recording or otherwise, without the prior consent of Avastor Corporation.
The product information provided in this manual is subject to change without
prior notice and does not represent a commitment on behalf of Avastor. Avastor
assumes no liability or responsibility for any errors that may appear in this
manual.
NOTICES
Any loss, corruption, or destruction of data is the sole responsibility of the user
of the XD5. Under no circumstances will Avastor be held liable for the recovery
or restoration of any data.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment.
PRECAUTIONS
 The main circuit board of the XD5 is susceptible to static electricity.
Proper grounding is required to prevent electrical damage to the XD5 or
other connected devices, including the host computer.
 Keep the XD5 away from liquids.
 Do not place the XD5 close to magnetic devices, high-voltage devices, or
near a heat source.
 Make sure Power Selector Switch is positioned to the correct voltage.
 Do not attempt to service this XD5 yourself. Please contact Avastor
Technical Support.
 Do not block ventilation. Proper airflow is required to ensure reliable
operation and to prevent overheating.
 RAID 1, 10, 3 and 5 modes offer data redundancy and fault tolerance. In
modes CLEAR, COMBINE and RAID 0, a failure of any drive will cause the
loss of some or all stored data.