AV-0009-MU Rv001
User´sManual
aSmart aS.1501
aSmart WARNS YOU OF THE INCIDENT BY PHONE
When an incident is detected, if no one is at home,
aSmart
will start calling up to the warning phone numbers previously
recorded by the user.
When you receive a call from your
aSmart
, you should proceed
as follows:
·
Firstly you will be informed several times of the reason,
either fire or a power failure, sending a voice message
"Fire alarm" or "Power failure", depending on the case.
·
Tap the following key
#
on your phone.
·
You will obtain the Alarms Menu. Where there are 2
options available:
4 Disable warnings
Exit
·
If you dial 4 on your phone, system will answer
"thank you, goodbye" and the calls process.
·
If you tap the following key
or the connection is
interrupted,
aSmart
will keep trying to inform on the
incident to the following number recorded.
When an incident is detected, either fire or a power failure
Smart
will send an alert into the house, "Fire alarm" or "Power
Failure alarm", depending on the case. Tapping anywhere
on the screen,
aSmart
will understand that the alert has been
received.
But if it is no the case, it will sart calling up to the warning
phone numbers set by the user. These phone numbers are
common to all the alarms warnings.
In case of Power failure, the user will be alerted about the
power outage as well as the reestablishment of the power
supply, by sending the following message "Power failure
activated".
ALARM CYCLE
NO
YES
YES
ANY INCIDENT
IS DETECTED ?
ALARM ACTIVATE
AND MONITORING
aSmart A VOICE MESSAGE IN
LOCAL MODE
"FIRE ALARM"
"POWER FAILURE"
HAS SOMEONE TAPPED ON
aSmart screen ?
aSmart MAKES A PHONE CALL
aSmart SEND A VOICE MESSAGE
BY PHONE
"FIRE ALARM"
"POWER FAILURE"
aSmart LAUNCHES ITS ALARM
MENU:
"TAP 4 TO DISABLE
WARNING..."
DOES SOMEONE ANSWER AN
TAP 4 ON THE TELEPHONE?
CALL THE FOLLOWING
PHONE
DOES SOMEONE ANSWER
ANDD TAP THE
#
KEY ON THE PHONE?
WARNING CANCELLED
YES
WARNING CANCELLED
NO
NO
YES
NO
TECHNICAL ALARMS
WHEN AN INSTRUSION IS DETECT
*
26
