Periodical examination:
A periodic examination at least
every 12 month is essential for the safety of the
AVANTI LIFT ANCHOR. The examination must be
performed by a certified technician following the
inspection form in this manual.
For the AVANTI LIFT ANCHOR the certified
technician only needs to be trained in any metallic
component covered by the European/American
standard norms for fall arrest equipment.
If the AVANTI LIFT ANCHOR is found not OK, it must be removed / replaced by a new AVANTI LIFT ANCHOR!
The result of the periodic examination must be recorded in the Registration form of anchor.
PPE Anchor:
Manufacturer:
Avanti
Type / Model:
Lift Anchor
Identification no.:
Fixing structure:
Lift serial no.:
Lift model:
Wind farm / WTG no.:
Installed by:
Installation company:
OK
not OK
1. Lift structure does not show any deterioration.
2. Anchor locking screws are fully inserted and tightened with 15 N·m.
3. Anchor does not show cracks, deformities, corrosion or other damages.
4. Anchor installed on the lift structure according to the instructions.
5. Anchor marking is clearly readable.
Signature of competent:
Name of competent in
capital letters:
Date:
5
.
Inspection
After installation:
An inspection must be carried out by a certified
technician following the inspection form in this
manual.
Before use:
Each time using the AVANTI LIFT ANCHOR the
user inspects the ANCHOR visual and manually by
twisting / pulling. Check the parts are properly fixed
and free of deformities, damages, cracks or similar
unacceptable defects.
6
.
Inspection form
Is the Anchor in good condition to be used?
Yes
No (Replace)
3
2
