ID
:
020392
Revision:
1-01
11
© Avantes BV
5.
Changing the light source bulb
1.
Disconnect the power connector from the socket.
2.
Remove the screw protection caps on the front side.
3.
Remove the screws with the torx screwdriver (Torx T10) (delivered with AvaLight).
4.
Take out the front plate with mount plate (lamp house with PCB are attached to it).
5.
Remove the lamp socket:
6.
Disconnect the connector of the lamp socket.
7.
Replace the lamp socket; WARNING: do not touch the glass with your fingers.
8.
Put back the lamp socket into the lamp house.
9.
Reconnect the connector of the lamp socket into the connector of the PCB.
Содержание AvaLight HAL Mini
Страница 1: ......
