AVANT e6 2018, Руководство оператора

Страница: 51 / 108

Avant e6
51
.
Starting the loader
Before start
Before starting the loader do the daily checks. See
page 86.
Always make sure you have all operator's manuals
available. Read and follow all operating and safety
instructions.
WARNING
Prevent movements of the
attachment:

Make sure that the auxiliary
hydraulics control lever is in
neutral position during starting.

Do not operate the auxiliary
hydraulics control buttons on
the joystick when starting (if
fitted).
The e6 loader will not start in
either of the following
conditions:

Electric motors will not start if
driver is not seated on driver's
seat.
When the ignition switch is
switched to position ON,
motors will start as soon as
driver is seated on the seat.
Note: If the Operator mode
switch is activated (disabling
the drive pedals), the auxiliary
hydraulics pump will start. See
page 55 for more information.

Drive functions are disabled if
either drive pedal is depressed
during start of the loader. Drive
function is enabled after
release of pedals.
.
.
Ignition key
.
The ignition key can switched into three
positions:
1. • (OFF) In this position:

The electric systems of the loader
are switched off.

Ignition key can be removed.

Charging of the battery is
possible.
2. P In this position, some of the electric
systems of the loader can be used:

The multi-function display is
powered and will show some
information, including the state of
charge.

Some lights of the loader can be
switched on.

The automatic main switch of the
loader (battery) is ON.

Charging of the battery is
possible.