AVANT e6 2018, Руководство оператора

Страница: 36 / 108

Avant e6
36
.
Rated operating capacity
To easily determine how much load the loader can
handle safely, a table of the tipping load and a
calculated Rated Operating Capacity (ROC) is
shown in the adjacent label. The label is also visible
from the driver's seat.
Rated operating capacity depends on type of use of
the loader:

In bucket and general application the rated
operating capacity is 50% of tipping load

In pallet fork application the rated operating
capacity is 60% of tipping load
The information shown in the table is the worst case
minimum load, with the conditions listed below.
Actual lifting capacity could be significantly higher, or
it may be lower, depending on terrain conditions,
available lifting force, and load distribution. Adding or
removing counterweights will affect the indicated
ROC.
The ROC table is valid, when:

The ground is firm and level

Loader is stationary or driven max 2 km/h, with
smooth and slow control movements

Driver weighing 75 kg is seated on the driver’s
seat

Load is distributed evenly on pallet forks, with
the load centre of gravity at 500 mm from the
vertical part of pallet fork arms. The weight of the
fork attachment is taken into account in the
indicated load value
Rated operating capacity label
Different positions of the loader boom, columns
in the label:
1. Maximum tipping load, stability when lifting
load just off the ground with pallet forks
2. Boom lifted to horizontal position
3. Boom lifted to horizontal position, telescopic
boom fully extended (least stable position)
4. Rated operating capacity in pallet fork
application, telescopic boom retracted
5. Rated operating capacity in pallet fork
application, telescopic boom fully extended
Different loader configurations, rows in the label:
1. Loader frame in straight position, additional
180 kg counterweights fitted
2. Loader frame in straight position, standard
counterweight fitted
3. Loader frame in fully articulated position,
standard counterweight fitted