AVANT CH100 Скачать руководство пользователя

Страница: 45 / 48

Avant Tecno Oy grants a 12-month warranty on this product, covering material and

manufacturing faults. The warranty comes into effect on the product’s delivery date.

The manufacturer is not liable for damages caused by:

• misuse of the product

• alterations or repairs made without the manufacturer’s permission

• insufficient maintenance

• non-original parts

The warranty does not cover wearing parts.

Send faulty parts, carriage paid, to the manufacturer for inspection. Repairs will be con-

ducted by Avant Tecno Oy or an authorized expert. The warranty is valid only if the bottom

part of this page is filled in and returned to the manufacturer within 30 days of receipt of

the product.

WARRANTY

Date of delivery:_____/_____ 20_____

Dealer:

Dealer’s address:

Dealer’s tel:

Product and type:

Serial number:

PRODUCT REGISTRATION FORM

Содержание CH100

















































Результаты поиска

Содержание CH100

Отзывы:

Похожие инструкции для CH100

Бренды по названию

Популярные бренды

AVANT CH100, Руководство оператора

Результаты поиска

Содержание CH100

Отзывы:

Похожие инструкции для CH100

Бренды по названию

Популярные бренды