AVANT CH100, Руководство оператора

Страница: 5 / 48

5
CH100
GENERAL SAFETY INSTRUCTIONS
These safety instructions are meant for the owners
of Avant equipment, as well as those who operate,
service or repair it.
The instructions help with:
• using the machine safely, appropriately and
effectively
• identifying, avoiding, and preventing potentially
dangerous situations
The manufacturer supplies an instruction manual,
which must always be available at the place of
operation of the machine. Each user must read the
safety, maintenance and operating instructions
before operating the machine, and comply with these
instructions at all times.
Ensure that every operator of
the machine is familiar with
the content of the instruction
manual and situation-specific
safety instructions, and has been
suitably trained before operating
the machine.
The machine complies with technical requirements
and applicable safety regulations. However, incorrect
use, maintenance or repair of the machine may cause
risks.
In addition to the instruction manual, remember to
comply with regulations of the local occupational
health and safety authorities, and with your country’s
laws and decrees.
The manufacturer is not liable for damages caused
by:
• incorrect, negligent or inappropriate use of the
product.
• non-original spare parts.
• normal wear and tear.
• misuse caused by an untrained person’s improper
actions.
• alterations made without the manufacturer’s
permission.
Written authorization must
be requested from the
manufacturer for any alterations
to the machine.
STARTING
• Familiarize yourself thoroughly with the use,
operation and controls of the machine and its
equipment before starting.
• Familiarize yourself with the capacities and
limitations of the machine and its equipment.
• Do not use the machine unless you are completely
familiar with its operation.
• Be aware of the machine’s danger zones.
• During operation, prevent bystanders from
entering the danger zone.
• Ensure that each operator has the necessary safety
equipment, such as a helmet, safety goggles, work
safety boots and suitable protective clothing.
• Never wear loose clothing around moving parts.
Protect long hair!
• Ensure that work is carried out according to the
stipulations of applicable occupational health and
safety legislation.
• Before starting up or using the machine, ensure
that it cannot cause a risk to other people or
property.
• Perform a safety check on the machine before
every use. If you observe any faults or deficiencies,
repair the machine immediately.
• Before operating the machine, ensure that there
are no foreign articles in it.
• Place the machine on a hard, level surface for
operation. In the winter avoid working in slippery
areas
• Before mounting and using the machine, check
the PTO drive shaft for correct condition and
attachment.
• Never use a faulty or deficient machine.
CAUTION!
!
CAUTION!
!