background image

3(16)

1.

 

Foreword

Avant Tecno Oy would like to thank you for your purchase of this AVANT attachment. It has been designed
and  manufactured  on  the  basis  of  years  of  product  development  and  experience.  By  familiarising  yourself
with this manual and following the instructions,  you  ascertain  your  safety  and  ensure  the  reliable  operation
and long service life of the equipment. Read the instructions carefully before starting to use the equipment or
performing maintenance.

With these instructions, even users with only little experience can use the concrete mixer and loader safely.
The manual also includes important instructions for experienced AVANT operators.  Ensure  that  all  persons
using  the  equipment  have  received  proper  guidance  and  familiarised  themselves  with  the  manual  and  all
safety instructions before using the equipment. Keep this manual  at  hand  throughout the  service life  of  the
equipment. If the manual is lost, you can request a new one from the retailer or manufacturer. If you sell or
transfer the equipment, be sure to hand over this manual to the new owner.

2.

 

Designed purpose of use

This  AVANT  Concrete  mixer  is  an  attachment  designed  and  manufactured  to  suite  AVANT  multi  purpose
loaders  for  mixing  and  easy  dispensing  of  concrete.  With  the  mixer  concrete  can  be  prepared  and
transported easily even at difficult locations. Concrete mixer is hydraulically operated and it can be emptied
by tilting the bucket or by opening the ejecting hatch at the side of the bucket and using the chute to channel
the concrete accurately.

Concrete mixing bucket is a handy tool when you need to make concrete without electricity or when concrete
needs to be transported to a difficult place.  Sand or gravel can be filled directly from the ground by using the
mixer like a normal bucket. The bucket can also be filled manually, when the bucket is supported against the
ground. The attachment is suitable for handling concrete or other similar type of material.

The  attachments  have  been  designed  to  require  as  little  maintenance  as  possible.  Regular  maintenance
tasks  can  be  performed  by  the  operator,  but  certain  more  demanding  tasks  must  be  left  to  qualified
professionals. Appropriate protective equipment and original spare parts must be used for the maintenance.
Read the maintenance and servicing instructions in this manual. Please  contact  your  AVANT  retailer if you
have additional questions about the operation or maintenance of the equipment or if you require spare parts
or maintenance services.

3.

 

Safety instructions for the concrete mixer

Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly
powerful, and improper or careless use may cause serious personal injury or property damage. Due to this,
you  should  carefully  familiarise  yourself  with  the  manuals  of  both  the  loader  and  the  attachment  before
starting operation. Do not use the attachment if you have not familiarised yourself with its operation and the
related hazards. The purpose of these instructions is to help you to:

 

use the equipment in a safe and efficient manner

 

monitor and prevent any hazardous situations

 

keep the equipment intact and ensure a long service life

 

When  attaching  the  attachment  to  the  loader,  ensure  that  the  locking  pins  of  the
loader's quick attach plate are in the lower position and that they have locked the
concrete mixer to the loader
.

 

The  loader  and its  controls  are  to  be  used  by  only  one  operator  at  a  time.  Do  not  go
near  the  attachment if  another  person  is  operating  the  controls  of the  loader,  or  allow
others to go near the machine when operating the loader.

 

Avoid the hazard of falling materials by keeping the bucket always close to the ground.
Be sure not to tilt the concrete mixer too far up to prevent material from spilling from the
bucket.

Содержание A21406

















Отзывы: