AVANT A21242, Руководство оператора для насадки

Страница: 15 / 22

15(12)
6. Instructions for use
Check the attachment and the operating area once more before starting work. Quick inspection of the
equipment before starting to use it is part of ensuring safety and the best performance of the equipment.
Practise the use of the spreader at an open and safe area. If you are unfamiliar with the loader model in use,
it is recommended to practice its use without any attachments.
Beware of hazard of entanglement near the rotating parts of
the spreader. Never leave the driver’s seat, if the auxiliary
hydraulics control lever is locked on, or if the spreader or its
parts can move unintentionally. Stop the spreader and the
loader following the safe stopping procedure before going
near the attachment. Always use suitable tools to clear
blockages or clogs, never remove the protective grille from
inside the spreader, and never try to reach below the grille
or spreader shafts manually. Make sure the grille is in its
place inside the spreader.
6.1. Checks before use
■
Check the general condition of the attachment and the loader, and check for possible
hydraulic oil leaks. The attachment must not be used, if there is a fault in the hydraulic
system of the loader or the attachment. Refer to Chapter 7 for maintenance instructions.
■
Check the condition of the mixing and spreading shafts, and that they can rotate freely.
Check that there is no string or other foreign material coiled around them.
■
Check that the drive chain cover is securely in its place on the side of the spreader. Using
the spreader without the guard in its place is prohibited. Check the drive chain if the spreader
makes loud noise during operation.
■
Lift and lock the outriggers to upper position always when using the spreader.
■
Before starting work, remove larger obstacles from the working area. Remember correct
working methods and avoid leaving the driver’s seat unnecessarily.
■
Drive carefully on uneven terrain and note the effect of heavy load at the rear or at the front
of the loader to the stability and handling of the loader.
■
Ensure that the loader and the attachment are used in a safe and intended manner. Operate
the controls of the loader only when sitting on the driver's seat. Do not allow children to
operate the machine.
Check before use that the drive chain protective cover is
fastened in its place. Operating the spreader is prohibited, if
all covers are not in place.