Avani SPC-230, Руководство пользователя

Страница: 5 / 66

SPC-230
AVANI Welding Fume Extractor
Page-5
instructions in the Operation Manual to avoid injuries.
10. Care and Maintenance:

Confirm that the parts/accessories have been fully assembled and will not
adversely affect the machine operation.

Check if the machine is operated properly.

Replace damaged parts or accessories according to the instructions of the
Manual. If the said instructions are not specified in the Manual, have a
professional technician carry out the maintenance or replacement.

Check that the electrical specifications of this machine meet safety requirements,
and that the maintenance is carried out by a licensed electrician. Use original
manufacturer’s parts and accessories to avoid injury.

If a problem occurs, contact your dealer immediately.
WELDING FUME EXTRACTOR SAFETY RULES
The Welding Fume Extractor can be dangerous if it is operated incorrectly. Therefore,
the product must be used cautiously to avoid causing a hazard or damage.
Unnecessary injuries may occur by failing to follow the instructions of the Safety Rules
Manual. Be sure to put on protection equipment or suit that can protect your body,
such as helmet and eye mask to avoid injuries from occurring. If any doubts or any
unfitness occurs during use, be sure to stop the operation immediately. Keep in mind
that the user shall be liable for using according to the specified safety rules and for
operating the machine correctly.
1.
Read this Manual carefully before operating the product.
2. Be sure to follow local electrical and safety regulations and observe the electrical
safety standards practiced in the relevant area. All electrical wire connections and
installation shall be carried out by a licensed electrician.
3. Do not operate the product near flammable
materials, as sparks may ignite these materials
and cause an explosion. Please confirm there aren’t any flammables near the
working site to avoid hazard.
4. This product is suitable for collecting smoke and welding oil gas. Do not use it in
collecting iron chips and dust at the same time to avoid producing sparks.
5. Before replacement of parts or filter materials, be certain that the switch is
disconnected.
6. Do not kink the power cord and keep it away from oil, chemicals or flammables.