Avani SPC-230, Руководство пользователя

Страница: 4 / 66

SPC-230
AVANI Welding Fume Extractor
Page-4
General Safety Information
(Continued)
Use this product carefully to effectively avoid any
possible danger. Observe the following safety
regulations to avoid bodily injury due to electrocution during use.
Read this Manual carefully before operating the product and preserve the Operation
Manual properly.
1.
Keep work area clean and organized.

A disorderly working environment will cause inconvenience and danger during
operation.
2. Check if the working environment is suitable for using the product.

Do not use the product in a humid environment.

Use the product in a good working environment to reduce risks.

Do not use the product in a flammable gas or liquid environment to avoid
danger.
3. Keep other persons away from the product, except for the operator, to avoid
danger.
4. All tools shall be safely stored.

When the tools are not used, please store them in a dry place safely beyond the
reach and access of children.
5. If the machine breaks down, contact a service technician. Do not attempt to repair
and possibly damage the machine.
6. When using the product, be sure to put on a welding suit and mask.
7. Use the electrical wires correctly.

During use, do not drag the electrical wires forcefully. Do not use these wires if
fraying or current leakage occurs to avoid injury to the operator.
8. Before replacing parts, shut off power to the machine.

Check that the switch is in “on” or “off” position. Do not attempt the
replacement when the machine is running. To replace parts or filter material,
make certain that the switch is “off”.
9. Use the power cord correctly. The total length of power cord shall not exceed 10
feet to avoid low power due to a drop in voltage and to prevent a possible hazard.
When connecting the product, always follow the