8
Installation (for qualified installers only)
© Travis Industries
4151204
100-01430
Fireplace Requirements
Insert must be placed within a code-conforming masonry fireplace or tested and listed factory-
built (metal) wood-burning fireplace. Repair any fireplace damage prior to installation.
Because the insert may use an optional circulation blower, clean the fireplace, smoke shelf, and
chimney prior to installation.
This heater may be placed in a bedroom. Please be aware of the large amount of heat this
appliance produces when determining a location.
Fireplace Sizing
Minimum Height
19.75” (502mm)
Minimum Width
27” (686mm)
Minimum Depth
15” (381mm)
Hearth Extension
0” (0mm)
The gas line should be installed prior to installing
the heater.
For tight fits (under 28”) see the section
“Removing the Vent Connector”
See “Leveling Legs” for details on leveling the
heater.
h
Attach the “This fireplace has been altered…” plate to the fireplace (use two screws or other
suitable method). You may wish to place it in a location where it will be covered by the surround
panels or face.
a
b
c
e
f
d
h
g
a
b
c
d
e
f
g
Содержание Radiant Plus Small Insert
Страница 32: ...32 Operation Travis Industries 4151204 100 01430 Remote Control Operation ...
Страница 33: ...Operation 33 Travis Industries 4151204 100 01430 Remote Control Operation continued ...
Страница 34: ...34 Operation Travis Industries 4151204 100 01430 Remote Control Operation continued ...
Страница 35: ...Operation 35 Travis Industries 4151204 100 01430 Remote Control Operation continued ...