7
Avalon Bay AB-ICE26 Series Portable Ice Maker
A
SSEMBLY
&
I
NSTALLATION
1.
Remove the exterior and interior packaging. Check that the ice
basket and ice scoop are included. If any parts are missing, please
contact customer service.
2.
Clean the interior with lukewarm water and a soft cloth. Take out
the ice basket and clean it. See Cleaning & Maintenance below for
complete cleaning instructions.
3.
Place your ice maker in a location that is protected from direct
sunlight and other heat sources such as stoves, furnaces, and
radiators.
4.
Place the ice maker on a level surface. All a minimum of 6 inches of
space between the back and sides of the unit and the wall.
5.
Allow the unit’s refrigerant to settle for one hour before plugging in
the ice maker for the first time. Also ensure that the ice maker is
positioned so that the plug is fully accessible.
Notice
: The recommended room temperature for this ice maker is 50°F
to 105°F. Operating the unit outside this range may cause the ice maker
to malfunction.
I
MPORTANT
N
OTICE
!
After unpacking your ice
maker, it must rest in an upright position for at
least one hour before you plug it in or the
compressor may be damaged, shortening the life
span of the unit.
I
MPORTANT
!
To avoid damaging the compressor,
after turning off the power to the ice maker,
wait at least 3 minutes before turning the
power on again.
