8
Avalon Bay AB-ICE26 Series Portable Ice Maker
O
PERATING
I
NSTRUCTIONS
H
OW TO
M
AKE
I
CE
1.
Open the ice maker’s top cover, remove the ice basket and pour
clean water into the reservoir. Keep the water level below the
maximum water level line.
2.
Press the ON/OFF button on the control panel to begin the ice
making cycle.
3.
Select the ice cube size by pressing the SELECT button. If the room
temperature is lower than 60°F, we recommend selecting small size
ice cubes in order to prevent ice from sticking together.
4.
The ice making cycle will last approximately 6 to 13 minutes,
depending on the selected ice cube size and the ambient room
temperature. The ice maker makes 9 pieces of ice per cycle.
R
EFILLING THE
W
ATER
R
ESERVOIR
The ADD WATER indicator light will turn on and the ice maker will
automatically stop when the water reservoir is empty or the water
pump within the reservoir cannot inject water through the ice making
mechanism.
1.
Press the ON/OFF button.
2.
Fill the water reservoir up to the maximum water level line.
3.
Allow the refrigerant in the compressor to settle for at least 3
minutes.
4.
Press the ON/OFF button again to restart the unit.
Direct or indirect sunlight may cause the infrared sensor within the unit
to malfunction. If the unit does not stop producing ice even when the
basket is full, move the unit to an area away from sunlight.
E
MPTYING THE
I
CE
B
UCKET
The ice maker will stop producing more ice when the ice basket is full. If
this occurs, the ICE FULL indicator will turn on. Empty the ice into a
freezer or use as needed. Unused ice will melt back into the reservoir
and be recycled into fresh ice.
