10
Avalon Bay AB-ICE26 Series Portable Ice Maker
T
ROUBLESHOOTING
P
ROBLEM
P
OSSIBLE
C
AUSE
S
OLUTION
The “ADD WATER”
indicator light is on.
There is not enough
water in the tank.
Turn off the ice maker,
fill it with water, and
press the ON/OFF button
again to restart the unit.
The “ICE FULL” indicator
light is on.
There is too much ice
in the basket.
Remove ice from the
basket. Continuously
press the SELECT button
for 5 seconds. The unit
could make ice for 10
cycles even if the ICE
FULL indicator light is on.
The ice making cycle
appears to be normal
but no ice is being
produced.
The room temperature
or the water
temperature in the
inner tank is too high.
The room temperature
should be between 50°F
- 105°F while the water
temperature should be
between 15°F - 90°F.
Change the water in the
reservoir or move the ice
maker to a cooler
location.
The refrigerant may be
leaking.
Consult a qualified
technician.
A pipe in the cooling
system may be
blocked.
Consult a qualified
technician.
The ice cubes stick
together.
The ice making cycle is
too long.
Turn off the ice maker
and restart it when the
ice is melted. Select
small size ice cubes with
the next cycle.
The water temperature
in the inner tank is too
low.
Replace the water in the
reservoir. The
recommended water
temperature is between
15°F - 90°F.
