background image

14

Avago Technologies Confi dential.  Restricted under NDA

Figure 15. RX DMI tab

Using the RX DMI Tab, the user can view all critical 
operating conditions of the receiver MiniPOD module. 
This view shows the receiver details:



Identifi cation information: e.g. Part Number, Serial 
Number



Real-time operating condition diagnostics: e.g. Rx 
Optical Input Power



Control status indicators such as: Temperature, Vcc, 



Alarm status indicators such as: Rx LOS and high or low 
power alarms – a check mark indicates assertion of the 
alarm

Furthermore the user has software ‘soft’ controls of critical 
parameters: 



High speed channel control: e.g. Turn on/off  Rx Channel 
Disable, Turn on/off  Rx Squelch Disable



Alarm channel control: e.g. RX LOS Mask 



Rx Amplifi er and Pre-Emphasis settings on a per 
channel basis

To see a snapshot of current settings, press the “Single 
Update” button. To see real time continuous reads, for 
example to see real time DMI fi elds, click the “Live Update” 
button.

Likewise for the soft control settings, in order for any 
change to take eff ect the “Single Update” button or “Live 
Update” button must be pressed.

As an example, if the user would like to change the Rx 
amplitude setting for Channel 6 to level 7, the user must 
fi rst move the “Adjust Rx Amplifi er Setting” bar under ‘CH 6’ 
to level 7. This action will show up in “Rx Amplifi er Settings 
to Write”, however, the setting will not be written to the 
byte fi eld until the “Live Update” button is pressed.

RX DMI Tab

Содержание AFBR-800EVB



















Отзывы: