11
Avago Technologies Confi dential. Restricted under NDA
Figure 12. Register List and Decoded Data Window
Registers List Window
Note that there are three pages for each of the MiniPOD Tx
and Rx memory maps.
For the Tx module;
MiniPOD Tx Base Page at Address 50
Common Page on MiniPOD Tx Upper Page 00h
MiniPOD Tx Upper Page 01h
For the Rx module;
MiniPOD Rx Base Page at Address 60
Common Page on MiniPOD Rx Upper Page 00h
MiniPOD Rx Upper Page 01h
The left window titled “Register List” provides the address
and name of the register fi elds. The user can toggle
between decimal format and hexadecimal format by
clicking the “Address Format” option in the menu bar
(Figure 13).
Also, by clicking an address in the “Register List” window,
the corresponding register address in Hexadecimal is
highlighted in the “Field Display” matrix window.
The user can expand the fi elds in a tree format in the
“Register List”. This allows the user to view the fi eld defi ni-
tions down to the single bit level. Fields that cannot be
expanded are only defi ned at the byte level.
Decoded Data Window and Field Display
The user defi nable/writable fi elds can be found by looking
at the “Decoded Data” window. Only fi elds that are high-
lighted yellow and have a check mark box next to them
are writable/changeable bit fi elds. The writable bits/bytes
correspond to the MiniPOD specifi cation and MiniPOD
Memory Map documents.
It is recommended that when the user fi rst opens the
MiniPOD Module Evaluation Program the “Read ALL”
button is pressed to see the current state of all fi elds.
Values in the Decoded Data Window can be in hexadeci-
mal, binary or will be in text describing the state of a bit
fi eld, depending on the applicable use of the bits/bytes.
