16
A
d
va
n
ce
d
S
et
ti
n
g
s
17
A
d
va
n
ce
d
S
e
tt
in
g
s
n
Note
: You can also use the
ASPECT
button on the remote control to cycle through the
aspect ratio options.
Color Temperature
Normal
– Does not enhance colors for warmth or coolness.
Cool
– Provides more blue/green tones.
Warm
– Provides more yellow/orange/red tones.
n
Note
: The tones in the Warm setting are considered the most accurate for viewing
standard broadcasts.
Noise Reduction
Use this setting to change the level of noise reduction on the TV. These levels are subjective.
What works for one person may not work for another.
Off
Low
(Default setting)
Medium
High
3D Y/C settings:
Setting the 3D Y/C filter to On prevents the degradation and warping of regular analog
signals sent through Composite or RF cables.
Gradient Enable
Turn this setting
On
to allow for the gradual blending of colors. Turn it
Off
to reduce
blending.
Blue Screen
Turn this setting
On
to show a blue screen when a channel is not receiving an adequate
signal. Turn
Off
to show a black screen when the signal is inadequate. Defaults to On.
Audio Settings
Use Preset Audio Settings
1.
Press
MENU
on the TV or remote control. The main menu displays.
2.
Press
or
to select
Sound
, then press
OK
or
.
3.
Press
or
to highlight
Equalizer Mode
, then press
and select select
User
,
Standard
,
Movie
,
Music
, or
News
.
4.
Press
MENU
to accept changes and go back to the previous menu.
Customize Audio Settings
1.
Follow Steps 1 through 3 under “
Use Preset Audio
Settings
.” Choose
User
.
2.
Press
or
to highlight
Balance
,
Audio Channel
,
Audio Language 1
,
Audio Language 2
, or
Advanced Audio
.
3.
Press
OK
or
to change settings (explained below),
and use
or
to navigate.
4.
Press
MENU
to accept changes and go back to the previous menu.
Balance
Use
to move the sound to the right speaker and
to move sound to the left speaker.
Defaults to
0
.
Audio Channel
Mono
Stereo
(default)
SAP
(second audio program)
Audio Language 1 and 2
Set up to two different languages for alternate language broadcasts:
English
,
Spanish
, or
French
. Not every program will have an alternate language. Audio Language 1 Defaults to
English
. Audio Language 2 Defaults to
Spanish
.
Advanced Audio Settings
1.
Follow steps 1 through 3 under “
Use Preset Audio Settings
.” Choose
User
.
2.
Press
or
to highlight
Advanced Audio
and press
OK
or
.
3.
Use
or
to choose
5-band Equalizer Set
or
Audio Only
(explained below).
4.
Press
MENU
to accept changes and go back to the previous menu.
5-Band Equalizer Set
To achieve better sound quality, use
to adjust each band until you achieve the best
results.
120Hz
500Hz
1.5KHz
5KHz
10KHz
Audio Only
1.
Press
to highlight and
OK
to change this setting
to
Yes
. The screen goes blank.
2.
To exit audio only mode, press and hold the
POWER
button on the TV or remote for 3
seconds.
Channel Settings
Set the Tuning Band
1.
Press
MENU
on the TV or remote control. The main menu displays.
2.
Press
or
on the TV or remote control to select
Channels
, then press
OK
or
.
3.
Press
to choose
Cable
(for satellite or cable
broadcasts) or
Air
(for over-the-air antenna).
Search for Channels Automatically
1.
Follow steps 1 and 2 under “
Set the Tuning Band
.”
2.
Press
or
to select
Auto Channel Search
, then
press
.
3.
Wait for the progress bar to reach 100%, then press
MENU
to exit.
