12
S
e
tu
p
13
S
e
tu
p
Connecting a PC
1.
Your TV automatically adjusts the screen resolution and saves it when receiving a VGA
signal from a PC. If the receiving signal is not the standard mode signal, refer to the
table to set your PC’s resolution.
Resolution
Vertical Frequency
Horizontal Frequency
640 x 480 (VGA)
60 Hz
– / –
72 Hz
– / –
75 Hz
– / –
720 x 400
70 Hz
– / +
800 x 600
60 Hz
48.363 KHz
1024 x 768 (XGA)
60 Hz
63.974 KHz
1280 x 800 (recommended)
60 Hz
49.6 KHz
2.
Use a VGA cable (not supplied) to connect the
PC RGB
port on the back of the TV to the
VGA port on your PC.
3.
Use a PC audio cable (not supplied) to connect the
PC-AUDIO
jack on the back of the
TV to the audio out jack on your PC.
Connecting to a Home Theater
Connect audio and video through your A/V receiver/amplifier
1.
Connect audio and video cables from your DVD player or other device to your A/V
receiver/amplifier, then connect the receiver/amplifier to the TV.
2.
Refer to the instructions from your A/V receiver/amplifier or speaker system to make
speaker connections.
n
Note
: For best results, use the highest quality of audio/video cables that your devices
will accept. Use the same type of audio and video cables to go from the device to the
receiver/amplifier and from the receiver/amplifier to the TV.
Optimal Speaker Layout
A/V Receiver/
Amplifier
TV
DVD Player or
Other Device
VGA Cable
PC Audio Cable
Video Out
Video In
Y Pb Pr
AM
LOOP
FM UNBAL
75
Ω
ANTENNA
FRONT
R
L
CENTER
SURROUND
S
K
E
R
S
R
L
SUB WOOFER
S-VIDEO
Audio Out
Audio In
Component Video
Out
In
Audio
Coaxial
Digital
Audio
Video
Y
PR
PB
L
R
S-Video
Coaxial
HDMI
