16
1
NIC: Select DVR NIC, only one NIC for default(Without setting)
2
IP address
Input the relevant IP address number (IP
192.168.1.188
default
3
DHCP:Click √ in front of
DHCP
, it will automatically acquire a valid IP
according to the router DHCP. If not, the last used IP is selected as the default.
4
Subnet Mask: Input relevant IP subnet mask number
5
Default Gateway: Input relevant default gateway
6
First DNS: Set DNS server IP address
7
Second DNS: Set another DNS server IP address
8
MAC
Display present MAC address
9
Default Route: Select diverse NIC router optional, only NIC1 for default,
which can connect IP devices with different network segments
10
Remote Port: Input relevant remote port number(5050 default)
11
HTTP Port:Input relevant port number(80 default)
12
RTMP Port: Click and enable RTMP port, default port is 1935
13
RTSP Port: Click and enable RTSP port, default port is 554
14
RTSP Hppt Port: Input corresponding port, default port is 8002
Notice: Use domain name to access and login should be mapped RTMP,
RTSP, 843 port
15
Enable 3G: After link 3G access equipment, click √ in front of
Enable
3G
, select device type, edit relevant phone number, and select work state,
then click
OK
to save, as shown in the below picture: