7
4
Date Format
Select date display mode for the access devices
5
OSD Position
Set corresponding display position for the access
devices name and display-time
6
Image Setting
Adjust brightness/ contrast/ saturation/ hue for the
access devices
Note
Except 1, other settings are only valid for the private protocol
connected devices)
4.2.2 Video Parameters
Modify the relevant channel video parameters on the
Video Parameters
interface,as shown in the below picture:
1
Channel
Select the channel number
2
Encoding Type: Main stream/ Sub stream for selection
3
Stream Type
Video&Audio/Video optional
4
Resolution
Camera supports several kinds of resolution
5
Bitrate Type: CBR/VBR optional
6
Bitrate: Select relevant bit rate for different conditions
7
Frame Rate: Select different frame rate from the drop-down list,Full
Frame P type for 25 and N type for 30 for default.
8
Video quality: Different level video quality optional,
Highest
for default.
9
I frame Interval: Set one frame interval,
25 frames
for default
Note:
Video Setting
will be directly modified the IP cameras
parameters, and is only valid for private protocol linkage channel