AUTOTERM PLANAR - 8DM - 12, Руководство по эксплуатации

Страница: 35 / 50

PLANAR-8DM-12/24 ENG
With the view to energy saving , the indicator stops glowing 20 seconds after the last
pressing of any knob, while this LED
№ 1 or LED № 2 is:
- lightning constantly if the heater is activated;
- blinking rarely (1 time per 1,5 second) if the heater is not activated;
- blinking while fault (1 time per second);
- blinking frequently (5 times per second) while deactivation of the heater (while
purging)
To restart the indication press any knob.
6.2 Succession of work with the control panel
6.2.1 Operation mode set up.
Before heater activation there’s need to select operation mode. Pressing knob with the
arrow «
A
» select operation mode of the heater according to desired power or temperature.
According to the choice the LED № 1 or LED № 2 is lightning. After selecting the mode
«according temperature» there’s need to press knob with the arrow «
B
» and choose the
sensor, according which the temperature of the heater will be controlled.
6.2.2 Activation and setting the power or temperature.
After mode selection there’s need to press the knob «O», while this the heater will start
working and there’s information on the indicator- the power mode or temperature mode
according to your choice.(see figure 6.3 or 6.4)
12 12
Figure 6.3- Power mode Figure 6.4 -Temperature mode
If power mode is selected, pressing knobs with arrows «
A
» (decreasing), «
B
»
(increasing) – you can set up the necessary power (see figure 6.3)which can be set within
2 to 6 kW. The indicator shows the scale according which the power is set up.
If temperature mode is selected, pressing knobs with arrows «
A
» (decreasing), «
B
»
(increasing) – you can set up the necessary temperature (see figure 6.4). The temperature is
set within 15° (59°F) to 30°C (86°F).
10